Aachen-Maastricht Institute for Biobased Materials

Research Output

Filter
Article
2017

Detection of on-target and off-target mutations generated by CRISPR/Cas9 and other sequence-specific nucleases

Jansing, J., Bortesi, L. & Fischer, R., 2017, In : Biotechnology Advances.

Research output: Contribution to journalArticleAcademicpeer-review

Engineering of viable implants

Jockenhoevel, S., Oct 2017, In : Biomedizinische Technik. 62, 5, p. 455-456

Research output: Contribution to journalArticleAcademicpeer-review

Environmental sustainability enhancement of a petroleum refinery through heat exchanger network retrofitting and renewable energy

Raei, B. & Ghannadzadeh, A., 2017, In : Advances in Environmental Technology. 3, 4, p. 217-227 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Exergy aided pinch analysis to enhance energy integration towards environmental sustainability in a chlorine-caustic soda production process

Ghannadzadeh, A. & Sadeqzadeh, M., Oct 2017, In : Applied Thermal Engineering. 125, p. 1518-1529 12 p.

Research output: Contribution to journalArticleAcademicpeer-review

EXPERIMENTAL INVESTIGATION OF ENDOSCOPIC CELL SPRAY

Bieber, M., Thiebes, A. L., Cornelissen, C. G., Jockenhoevel, S., Kneer, R. & Reddemann, M. A., 2017, In : Atomization and Sprays. 27, 10, p. 847-858

Research output: Contribution to journalArticleAcademicpeer-review

Fluorinated Polyurethane Scaffolds for F-19 Magnetic Resonance Imaging

Lammers, T., Mertens, M. E., Schuster, P., Rahimi, K., Shi, Y., Schulz, V., Kuehne, A. J. C., Jockenhoevel, S. & Kiessling, F., 11 Apr 2017, In : Chemistry of Materials. 29, 7, p. 2669-2671

Research output: Contribution to journalArticleAcademicpeer-review

Open Access

Freeze-Drying as a Novel Biofabrication Method for Achieving a Controlled Microarchitecture within Large, Complex Natural Biomaterial Scaffolds

Brougham, C. M., Levingstone, T. J., Shen, N., Cooney, G. M., Jockenhoevel, S., Flanagan, T. C. & O'Brien, F. J., 8 Nov 2017, In : Advanced Healthcare Materials. 6, 21

Research output: Contribution to journalArticleAcademicpeer-review

Gefitinib/gefitinib microspheres loaded polyurethane constructs as drug-eluting stent coating

Chen, W., Clauser, J., Thiebes, A. L., McGrath, D. J., Kelly, N., van Steenbergen, M. J., Jockenhoevel, S., Steinseifer, U., McHugh, P. E., Hennink, W. E. & Kok, R. J., 30 May 2017, In : European Journal of Pharmaceutical Sciences. 103, p. 94-103

Research output: Contribution to journalArticleAcademicpeer-review

Open Access

GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis

Stratesteffen, H., Koepf, M., Kreimendahl, F., Blaeser, A., Jockenhoevel, S. & Fischer, H., Dec 2017, In : Biofabrication. 9, 4, 045002.

Research output: Contribution to journalArticleAcademicpeer-review

Increasing the solubility range of polyesters by tuning their microstructure with comonomers

Delgove, M., Luchies, J., Wauters, I., Deroover, G. G. P., de Wildeman, S. & Bernaerts, K., 7 Jul 2017, In : Polymer Chemistry. 8, 32, p. 4696-4706 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access

Investigating the mechanical behavior of composites made from textile industry waste

Maqsood, M., 2017, In : Journal of the Textile Institute. 108, 5, p. 835-839

Research output: Contribution to journalArticleAcademicpeer-review

In Vitro Quantification of Luminal Denudation After Crimping and Balloon Dilatation of Endothelialized Covered Stents

Ichihashi, S., Wolf, F., Schmitz-Rode, T., Kichikawa, K., Jockenhoevel, S. & Mela, P., Aug 2017, In : Cardiovascular and Interventional Radiology. 40, 8, p. 1229-1236

Research output: Contribution to journalArticleAcademicpeer-review

Label-Free Detection of Small Organic Molecules by Molecularly Imprinted Polymer Functionalized Thermocouples: Toward In Vivo Applications

Diliën, H., Peeters, M., Royakkers, J., Harings, J., Cornelis, P., Wagner, P., Steen Redeker, E., Banks, C. E., Eersels, K., van Grinsven, B. & Cleij, T. J., 28 Apr 2017, In : ACS sensors. 2, 4, p. 583-589 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access

Linker Functionalization in MIL-47(V)-R Metal-Organic Frameworks: Understanding the Electronic Structure

Vanpoucke, D. E. P., 13 Apr 2017, In : Journal of Physical Chemistry C. 121, 14, p. 8014-8022 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study

Rounaghi, S. A., Vanpoucke, D. E. P., Eshghi, H., Scudino, S., Esmaeili, E., Oswald, S. & Eckert, J., 21 May 2017, In : Physical Chemistry Chemical Physics. 19, 19, p. 12414-12424 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Mechanoresponsiveness of human adipose stem cells on nanocomposite and micro-hybrid composite

van Esterik, F. A. S., Ghazanfari, S., Zandieh-Doulabi, B., Semeins, C. M., Kleverlaan, C. J. & Klein-Nulend, J., Nov 2017, In : Journal of Biomedical Materials Research Part A. 105, 11, p. 2986-2994 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Metallic-like thermal conductivity in a lightweight insulator: Solid-state processed Ultra High Molecular Weight Polyethylene tapes and films

Ronca, S., Igarashi, T., Forte, G. & Rastogi, S., 11 Aug 2017, In : Polymer. 123, p. 203-210 8 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access

Mineralization-defects are comparable in fluorotic impacted human teeth and fluorotic mouse incisors

Jalali, R., Ghazanfari, S., Guy, F., Lyaruu, D., van Ruijve, L., DenBesten, P., Martignon, S., Castiblanco, G. & Bronckers, A., Nov 2017, In : Archives of Oral Biology. 83, p. 214-221 8 p.

Research output: Contribution to journalArticleAcademicpeer-review

Multi-scale modelling of textile reinforced artificial tubular aortic heart valves

Sodhani, D., Reese, S., Moreira, R., Jockenhoevel, S., Mela, P. & Stapleton, S. E., Feb 2017, In : Meccanica. 52, 3, p. 677-693

Research output: Contribution to journalArticleAcademicpeer-review

Polyamides based on a partially bio-based spirodiamine

Wróblewska, O., Lingier, S., Noordijk, J., Du Prez, F., de Wildeman, S. & Bernaerts, K., Nov 2017, In : European Polymer Journal. 96, p. 221-231 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access

Polyesters and Polycarbonates from Renewable Ketal Monomers

Lingier, S., Spiesschaert, Y., Dhanis, B., de Wildeman, S. & Du Prez, F., 2017, In : Macromolecules. 50, 14, p. 5346-5352

Research output: Contribution to journalArticleAcademicpeer-review

Pre-fabricated, environmentally friendly and energy self-sufficient single-family house in Kenya

Samani, P., Mendes, A., Leal, V. & Correia, N., 20 Jan 2017, In : Journal of Cleaner Production. 142, p. 2100-2113 14 p.

Research output: Contribution to journalArticleAcademicpeer-review

PulmoStent: In Vitro to In Vivo Evaluation of a Tissue Engineered Endobronchial Stent

Thiebes, A. L., Kelly, N., Sweeney, C. A., McGrath, D. J., Clauser, J., Kurtenbach, K., Gesche, V. N., Chen, W., Kok, R. J., Steinseifer, U., Bruzzi, M., O'Brien, B. J., McHugh, P. E., Jockenhoevel, S. & Cornelissen, C. G., Apr 2017, In : Annals of Biomedical Engineering. 45, 4, p. 873-883 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials

Maqsood, M., 2017, In : Journal of the Textile Institute. 108, 1, p. 84-88 5 p.

Research output: Contribution to journalArticleAcademicpeer-review

Revisiting the neutral C-vacancy in diamond: Localization of electrons through DFT plus U

Vanpoucke, D. E. P. & Haenen, K., Oct 2017, In : Diamond and Related Materials. 79, p. 60-69 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Rigid, bio-based polyamides from galactaric acid derivatives with elevated glass transition temperatures and their characterization

Wróblewska, A. A., Bernaerts, K. & de Wildeman, S., 25 Aug 2017, In : Polymer. 124, p. 252-262 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Superhydrophobic functionalization of cutinase activated poly(lactic acid) surfaces

Ortner, A., Pellis, A., Gamerith, C., Orcal Yebra, A., Scaini, D., Kaluzna, I., Mink, D., de Wildeman, S., Herrero Acero, E. & Guebitz, G., 7 Feb 2017, In : Green Chemistry. 19, 3, p. 816-822 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

Three-Dimensional Printing and Angiogenesis: Tailored Agarose-Type I Collagen Blends Comprise Three-Dimensional Printability and Angiogenesis Potential for Tissue-Engineered Substitutes

Kreimendahl, F., Köpf, M., Thiebes, A. L., Duarte Campos, D. F., Blaeser, A., Schmitz-Rode, T., Apel, C., Jockenhoevel, S. & Fischer, H., Oct 2017, In : Tissue Engineering. Part C. Methods . 23, 10, p. 604-615 12 p.

Research output: Contribution to journalArticleAcademicpeer-review

Towards a Biohybrid Lung: Endothelial Cells Promote Oxygen Transfer through Gas Permeable Membranes

Menzel, S., Finocchiaro, N., Donay, C., Thiebes, A. L., Hesselmann, F., Arens, J., Djeljadini, S., Wessling, M., Schmitz-Rode, T., Jockenhoevel, S. & Cornelissen, C. G., 2017, In : BioMed Research International. 2017, 8 p., 5258196.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access

Towards a Biohybrid Lung Assist Device: N-Acetylcysteine Reduces Oxygen Toxicity and Changes Endothelial Cells' Morphology

Plein, T., Thiebes, A. L., Finocchiaro, N., Hesselmann, F., Schmitz-Rode, T., Jockenhoevel, S. & Cornelissen, C. G., Apr 2017, In : Cellular and Molecular Bioengineering. 10, 2, p. 153-161

Research output: Contribution to journalArticleAcademicpeer-review

Umbilical cord as human cell source for mitral valve tissue engineering - venous vs. arterial cells

Malischewski, A., Moreira, R., Hurtado, L., Gesche, V., Schmitz-Rode, T., Jockenhoevel, S. & Mela, P., Oct 2017, In : Biomedizinische Technik. 62, 5, p. 457-466

Research output: Contribution to journalArticleAcademicpeer-review

2016

Application of electrodeposited piezo-resistive polypyrrole for a pressure-sensitive bruxism sensor

Akkermans, O., Spronck, M., Kluskens, T., Offerein, F., Saralidze, K., Aarts, J., Keshaniyan, P., Redeker, E. S., Dilien, H., van Grinsven, B. & Cleij, T. J., Jun 2016, In : Physica Status Solidi A-applications and Materials Science. 213, 6, p. 1505-1509

Research output: Contribution to journalArticleAcademicpeer-review

Comparison of passive cooling techniques in improving thermal comfort of occupants of a pre-fabricated building

Samani, P., Leal, V., Mendes, A. & Correia, N., 15 May 2016, In : Energy and Buildings. 120, p. 30-44 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Condensed Mode Cooling for Ethylene Polymerization: Part III. The Impact of Induced Condensing Agents on Particle Morphology and Polymer Properties

Namkajorn, M., Alizadeh, A., Romano, D., Rastogi, S. & McKenna, T. F. L., Jul 2016, In : Macromolecular Chemistry and Physics. 217, 13, p. 1521-1528

Research output: Contribution to journalArticleAcademicpeer-review

Conformational and Structural Changes with Increasing Methylene Segment Length in Aromatic-Aliphatic Polyamides

Deshmukh, Y. S., Wilsens, C. H. R. M., Verhoef, R., Hansen, M. R., Dudenko, D., Graf, R., Klop, E. A. & Rastogi, S., 9 Feb 2016, In : Macromolecules. 49, 3, p. 950-962 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

Cradle-to-Gate Environmental Life Cycle Assessment of the Portfolio of an Innovative Forest Products Manufacturing Unit

Laurent, A-B., Menard, J-F., Lesage, P. & Beauregard, R., Nov 2016, In : Bioresources. 11, 4, p. 8981-9001 20 p.

Research output: Contribution to journalArticleAcademicpeer-review

Diagnosis of an alternative ammonia process technology to reduce exergy losses

Ghannadzadeh, A. & Sadeqzadeh, M., 1 Feb 2016, In : Energy Conversion and Management. 109, p. 63-70 8 p.

Research output: Contribution to journalArticleAcademicpeer-review

Differentiation of respiratory epithelium in a 3-dimensional co-culture with fibroblasts embedded in fibrin gel

Albers, S., Thiebes, A. L., Gessenich, K. L., Jockenhoevel, S. & Cornelissen, C. G., 1 Mar 2016, In : Multidisciplinary Respiratory Medicine. 11, 6.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access

Effect of woven fabric structure on the air permeability and moisture management properties

Maqsood, M., 3 May 2016, In : Journal of the Textile Institute. 107, 5, p. 596-605 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Evaluation of an alternative chlorine production process for energy saving toward sustainability

Ghannadzadeh, A. & Sadeqzadeh, M., Sep 2016, In : Environmental Progress & Sustainable Energy. 35, 5, p. 1512-1520 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Exergy analysis as a scoping tool for cleaner production of chemicals: a case study of an ethylene production process

Ghannadzadeh, A. & Sadeqzadeh, M., 15 Aug 2016, In : Journal of Cleaner Production. 129, p. 508-520 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

First-Principles Study of Antisite Defect Configurations in ZnGa2O4: Cr Persistent Phosphors

De Vos, A., Lejaeghere, K., Vanpoucke, D. E. P., Joos, J. J., Smet, P. F. & Hemelsoet, K., 7 Mar 2016, In : Inorganic Chemistry. 55, 5, p. 2402-2412 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Flexible Endoscopic Spray Application of Respiratory Epithelial Cells as Platform Technology to Apply Cells in Tubular Organs

Thiebes, A. L., Reddemann, M. A., Palmer, J., Kneer, R., Jockenhoevel, S. & Cornelissen, C. G., 1 Apr 2016, In : Tissue Engineering. Part C. Methods . 22, 4, p. 322-331 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Heterogeneous Distribution of Entanglements in a Nonequilibrium Polymer Melt of UHMWPE: Influence on Crystallization without and with Graphene Oxide

Liu, K., de Boer, E. L., Yao, Y., Romano, D., Ronca, S. & Rastogi, S., 11 Oct 2016, In : Macromolecules. 49, 19, p. 7497-7509

Research output: Contribution to journalArticleAcademicpeer-review

Hybrid elastin-like recombinamer-fibrin gels: physical characterization and in vitro evaluation for cardiovascular tissue engineering applications

Gonzalez de Torre, I., Weber, M., Quintanilla, L., Alonso, M., Jockenhoevel, S., Rodriguez Cabello, J. C. & Mela, P., 2016, In : Biomaterials Science. 4, 9, p. 1361-1370

Research output: Contribution to journalArticleAcademicpeer-review

Improving Stiffness, Strength, and Toughness of Poly(omega-pentadecalactone) Fibers through in Situ Reinforcement with a Vanillic Acid-Based Thermotropic Liquid Crystalline Polyester

Wilsens, C. H. R. M., Pepels, M. P. F., Spoelstra, A. B., Portale, G., Auhl, D., Deshmukh, Y. S. & Harings, J. A. W., 22 Mar 2016, In : Macromolecules. 49, 6, p. 2228-2237 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Mechanochemical route to the synthesis of nanostructured Aluminium nitride

Rounaghi, S. A., Eshghi, H., Scudino, S., Vyalikh, A., Vanpoucke, D. E. P., Gruner, W., Oswald, S., Rashid, A. R. K., Khoshkhoo, M. S., Scheler, U. & Eckert, J., 21 Sep 2016, In : Scientific Reports. 6, 11 p., 33375.

Research output: Contribution to journalArticleAcademicpeer-review

Melt-Miscible Oxalamide Based Nucleating Agents and Their Nucleation Efficiency in Isotactic Polypropylene

Deshmukh, Y. S., Wilsens, C. H. R. M., Leone, N., Portale, G., Harings, J. A. W. & Rastogi, S., 16 Nov 2016, In : Industrial & Engineering Chemistry Research. 55, 45, p. 11756-11766 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns

Maqsood, M., 2016, In : Journal of the Textile Institute. 107, 7, p. 873-878 6 p.

Research output: Contribution to journalArticleAcademicpeer-review